Surenoo Graphic OLED Module 1.54" 12864 128*64 128X64 Graphic LCD Module Display Screen Panel PM-OLED 6800/8080 8-Bit Parallel 4-Wire Serial SPI IIC I2C SSD1309 Controller SOG12864C1_M154

• Overview

SOG12864C1_M154 is 1.54" 128X64 Dots Graphic OLED Module, build-in SSD1309 controller supprot 6800/8080 8-Bit Parallel & 4-Wire Serial SPI & IIC MPU interface, wide operating temperature range, RoHS Compliant, It's 3.3V power supply.

It's easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, ARM and Raspberry Pi. It can be used in any embedded systems, industrial device, security, medical and hand-held equipment.

• Specification

Gross Weight	0.040Kg
Manufacturer	Surenoo
Display Type	Graphic OLED Module
Continuity Supply	More than 10 years
Part No.	SOG12864C1_M154
Diagonal Size (Visual Area)	1.54"
Display Format	128*64 Dots
Interface	6800/8080 8-Bit Parallel, 4-Wire Serial SPI, IIC
IC or Equivalent	SSD1309 or Equal
Voltage(Type)	3.3-5.0V
Outline Dimension	58.00(W)x32.00(H)x3.80(T)mm
Visual Area	37.052x19.516mm
Active Area	37.052x17.516mm
Dots Size	0.254x0.254mm
Dots Pitch	0.274x0.274mm
Display Type	PM-OLED Panel
Colors Code	White(SOGW) / Yellow(SOGY) / Blue(SOGB)
IC Package	COG
Viewing Direction	Full Viewing Angle
Operating Temperature	-40℃~70℃
Storage Temperature	-40℃~80℃

• Outline Drawing (SOG12864C1_M154)

• Interface

1. Parallel Interface(8080): (USE: R2 R4, NO USE: R3 R5) / Parallel Interface(6800): (USE: R3 R4 ; NO USE: R2 R5)

Pin No.	Pin Name		Description
1	VSS (0V)		Ground 0V
2	VDD (3.3-5.0V)		Power Supply for logic
3	/RES (H/L)		Active LOW Reset signal
4	D/C (H/L)		H: Data L: Command
5	8080: WR (H/L)	6800: R/W (H/L)	8080: Active LOW Writed signal	6800: Read/Write: R/W=1: Read; R/W:=0: Write
6	8080: RD (H/L)	6800: E (H/L)	8080: Active LOW Read signal	6800: Operation enable signal. Falling edge triggered.
7-14	D0-D7		Data Bus

2. 4-Wire SPI: (USE: R3 R5; NO USE: R2 R4) / IIC (USE: R2 R5; NO USE: R3 R4)

Pin No.	Pin Name		Description
1	VSS (0V)		Ground 0V
2	VDD (3.3-5.0V)		Power Supply for logic
3	/RES (H/L)		Active LOW Reset signal
4	SPI: D/C (H/L)	IIC: SA0 (H/L)	SPI: H: Data L: Command	IIC: Slave Address Selection signal
5-6	GND		Ground 0V
7	SCLK(DB0)		Serial Clock signal
8	SPI: SDIN(DB1)	IIC: SDAIN(DB1)	Serial Data Input signal	IIC: Serial Data input signal (pins 11 and 12 can be tied together)
9	SPI: NC	IIC: SDAOUT(DB1)	No Connection	IIC: Serial Data output signal (pin 12 can be no connect)
10-14	GND (D3-D7)		Ground 0V

• Documents