Home
/
SLG160160A Outline=83.80X76.50MM 3.0" 160160 1600X160 160*160 Surenoo Graphic LCD Module Display Screen Panel 8080 8-Bit Parallel UC1698U Controller FSTN Positive LED Backlight for 8051 PIC AVR ARM
SLG160160A Outline=83.80X76.50MM 3.0" 160160 1600X160 160*160 Surenoo Graphic LCD Module Display Screen Panel 8080 8-Bit Parallel UC1698U Controller FSTN Positive LED Backlight for 8051 PIC AVR ARM
Model No.: SLG1600160A (SLGM160160A / SLGP160160A) (3.0")
Display Format: 160*160 Dots
PCB Size: 83.80X76.50MM
Controller: UC1698U or Equal
Display Format: 160*160 Dots
PCB Size: 83.80X76.50MM
Controller: UC1698U or Equal
4 sold
Quantity
Detail
Customer Reviews
- Overview
SLG160160A is a 3.0" 160*160 dots Monochrome Graphic LCD Module, UC1698U COG Graphic LCD Controller standard 18P/1.0 FFC 160*160 parallel Graphic LCD Module, supprot 8080 8-Bit parallel interface, wide operating temperature range, rohs compliant. 3.3V power supply in default and 5.0V is optional for bulk order.
It's easily controlled by MCU such as 8051, PIC, AVR and ARM. It can be used in any embedded systems, industrial device, security, medical and hand-held equipment.
- Specification
| Gross Weight | 0.080Kg |
| Manufacturer | Surenoo |
| Display Type | Graphic LCD Module |
| Continuity Supply | More than 10 years |
| Part No. | SLG160160A (SLGM160160A / SLGP160160A) |
| Display Format | 160*160 Dots |
| Interface | 6800 8-bit Parallel |
| IC or Equivalent | UC1698U or Equal |
| Voltage | 3.3V in default |
| Connection | 1X18P/1.0 FFC; 30P/0.5 FPC |
| Outline Dimension | SLGM160160A: 83.80(W)x76.50(H)x8.50(T)mm; SLGP160160A: 80.00(W)x72.50(H)x5.00(T)mm |
| Visual Area | 60.00x60.00mm |
| Active Area | 54.38x54.38mm |
| Display Type | FSTN Positive |
| Backlight Type (LED) | White |
| IC Package | COG |
| Viewing Direction | 6:00 O'Clock |
|
Operating Temperature
|
-20℃~70℃
|
|
Storage Temperature
|
-30℃~80℃
|
- Outline Drawing
2. Model No.: SLGP160160A
- Interface
| Pin No. | Symbol | Description | |
| Model No.: SLGM160160A |
|||
| 1 | VSS | Power Ground | |
| 2 | CD | Control / Display Pin: ”L”: Control data, ”H”: Display data | |
| 3 | WR |
Write Signal, Active-Low | |
| 4 | RD | Read Signal, Active-Low | |
| 5 | CS |
Chip Selection, Active-Low | |
| 6 | RST |
Reset Signal, Active-Low | |
| 7 | VDD |
Logic Power Supply | |
| 8-15 | DB0-DB7 | Data Bus Line | |
| 17 | Busy | Controller Busy Signal, MPU should poll this signal before accessing the LCD module | |
| 18 | BLK | Backlight Cathode | |
| 19 | NC | No Connection | |
| 20 | BLA | Backlight Anode | |
| Model No.: SLGP160160A | |||
| 1-2 | NC | No Connection. | |
| 3-4 | VLCD | High voltage LCD Power Supply. When internal VLCD is used, connect these pins together. When external VLCD source is used, connect external VLCD source to VLCDIN, pins and leave VLCDOUT open. | |
| 5 | VS+ | LCD Bias Voltages. These are the voltage sources to provide SEG driving currents. These voltages are generated internally. Connect capacitors of CAX / CBX value between VAX+ / VBX+ and VAX– / VBX–, respectively. | |
| 6 | VS- | ||
| 7 | VB0- | ||
| 8 | VB1- | ||
| 9 | VB1+ | ||
| 10 | VB0+ | ||
| 11-12 | VDD | Power supply for LCD circuit. | |
| 13-14 | VSS | Ground. | |
| 15 | BM0 | Bus Mode: The interface bus mode is determined by BM0 with the following relationship: | |
| BM0 | Mode | ||
| I | 6800/8-bit | ||
| 0 | 8080/8-bit | ||
| 16 | CS0 | Chip Selection. Chip is selected when CS0 = “L”. When the chip is not selected, DB [7:0] will be high impedance. | |
| 17 | A0(CD) | Selects Control data or Display data for read/write operation. In S9 mode, CD pin is not used. Connect to VSS when not used. ”L”: Control data ”H”: Display data |
|
| 18 | WR1(RD) | WR[1:0] control the read/write operation of the host interface. See section Host Interface for more detail. In parallel mode, the meaning of WR[1:0] depends on whether the interface is in the 6800 mode or the 8080 mode. In serial interface modes, these two pins are not used, connect them to VSS. |
|
| 19 | WR0(WR) | ||
| 20 | RST | When RST=”L”, all control registers are re-initialized by their default states. Since UC1698u has built-in Power-ON reset and software reset commands, RST pin is not required for proper chip operation. An RC Filter has been included on-chip. There is no need for external RC noise filter. When RST is not used, connect the pin to VDD. | |
| 21-28 | DB0-DB7 | Data Bus Line | |
| 29-30 | NC | No Connection | |
- Documents
| No. | Item | Document Name | File Type | ICON | Date | Description | Mark |
| 1 | Datasheet | 160X160 Graphic LCD Module Datasheet |  |
2013-03-17 | Standard 160160 Graphic LCD Module | ||
| 2 | Controller | Controller IC UC1698U Datasheet | |
2008-09-24 | Graphic LCD Controller: UC198U |