Home
/
Surenoo 7.0" 1024*600 800*480 3-Wire Serail SPI LT7686 TFT LCD Module Display Screen Capacitive Touch Panel CTP FT5426 for 51 STM32 Dev. Board
Surenoo 7.0" 1024*600 800*480 3-Wire Serail SPI LT7686 TFT LCD Module Display Screen Capacitive Touch Panel CTP FT5426 for 51 STM32 Dev. Board
Model No.: SSP0700A_1024600/SSP0700A_800480
Model Size: 7.0 Inch
Resolution: 1024*600 / 800*480
Interface: 3-Wire Serial SPI
SPI Controller: LT7686
Touch Type: CTP (GT5426)
Model Size: 7.0 Inch
Resolution: 1024*600 / 800*480
Interface: 3-Wire Serial SPI
SPI Controller: LT7686
Touch Type: CTP (GT5426)
19 sold
Quantity
Detail
Customer Reviews
- Overview
Surenoo 7.0 Inch 3-Wire Serial SPI CTP Touch Display Module, it's standard 20P/2.54 Pin Header solder and 20P/0.5 Connector on Board.
It's easy to drive it on STM32 51 Dev. Board.
It's easy to drive it on STM32 51 Dev. Board.
- Specification
| Item of general information | Contents | Unit |
||
| LCD Display Size (Diagonal) | 7.0" | Inch | ||
| Module Structure | LCD + C-TOUCH + PCB | - | ||
| LCD Display Type | TFT/TRANSMISSIVE | - | ||
| LCD Display Mode | Normally Black | - | ||
| Recommended Viewing Direction | 12:00 | O'Clock | ||
| Gray Inversion Direction | 6:00 | O'Clock | ||
| Module Size (W×H×T) | 185.00X105.00X7.98 | MM | ||
| Model No. (Datasheet Download) | SSP0700A_1024600 | SSP0700A_800480 | - | |
| Active Area (W×H) | 154.21X85.92 | 154.08X85.92 | MM | |
| Resolution | 1024(RGB)×600 | 800(RGB)×480 | Pixel | |
| Pixel Pitch (W×H) | 0.1506X0.1432 | 0.1926X0.1790 | MM | |
| Interface Type | LCD | 3-Wire SPI Interface (LT7686) | - | |
| Touch (CTP) | IIC Interface (FT5426) |
- | ||
| Module Input Voltage | 5.0V | V | ||
| Module Power Consumption | - | mA | ||
| Color Numbers | 262K | - | ||
| Backlight Type | White LED | - | ||
- Outline Drawing
2. SSP0700A_800480
- Interface
| Pin No. | Symbol | I/O | Description |
| 1-2 | VCC5V | Power Supply | Module Power Supply (5V Typ.) |
| 3, 4, 16, 20 | GND |
Power Supply | Power Ground |
| 5 | LCD_CS | I | Chip Select Pin for 3-Wire Serial I/F |
| 6 | LCD_MOSI |
I | Data Input Pin of 3-Wire SPI I/F |
| 7 | LCD_SCLK | I | Clock of 3-Wire Serial I/F |
| 8 | LCD_INT | O | The Interrupt Output for host to indicate the status |
| 9 | LCD_RST | I | This is an Active Low Reset Pin for LCD |
| 10 | LCD_MISO | O | Bi-direction Data Pin of 3-Wire SPI I/F |
| 11 | CTP_INT |
O | CTP External Interrupt to the host |
| 12 | CTP_SCL | I | CTP I2C Clock Input |
| 13 | CTP_SDA | I/O | CTP I2C Data Input and Output |
| 14 | CTP_RST | I | CTP External Reset Signal, Low is Active |
| 15, 17-19 | NC |
- | No Connection |
2. J3 Interface Description (SPI Flash Burning Interface)
| Pin No. | Symbol | I/O | Description |
| 1 | SF_CLK | I | Serial Clock Input |
| 2 | SF_DI | I | Serial Data Input |
| 3 | SF_DO | O | Serial Data Output |
| 4 | SF_CD |
I | Chip Selection |
| 5 | LCD_RST | I | LCD Reset Signal, This Pin must be Pull Low |
| 6 | GND | Power Supply | Power Ground |
| 7-8 | NC | - | No Connection |
| 9-10 | 3.3V | Power Supply | Power Supply for the SPI Flash (3.3V) |