Home / Color Display Module >> SPI Display Module >> 4.0-3.5-3.2-2.8-2.4 Inch / Surenoo 4.0" 480*320 / 3.5" 480*320 / 3.2" 320*240 / 2.8" 320*240 Serail SPI TFT IPS LCD Module Display Screen Capacitive Touch Panel CTP NTP Optional for Arduino 51 STM32 Dev. Board
  • Surenoo 4.0
  • Surenoo 4.0
  • Surenoo 4.0
  • Surenoo 4.0
  • Surenoo 4.0
  • Surenoo 4.0
  • Surenoo 4.0
  • Surenoo 4.0
  • Surenoo 4.0

Surenoo 4.0" 480*320 / 3.5" 480*320 / 3.2" 320*240 / 2.8" 320*240 Serail SPI TFT IPS LCD Module Display Screen Capacitive Touch Panel CTP NTP Optional for Arduino 51 STM32 Dev. Board

Model No.: SSP0XX0B_480320/320240
Model Size: 4.0-3.5-3.2-2.8 Inch
Resolution: 480*320 / 320*240
Interface: Serial SPI
Controller: ST7796 / ILI9341
35 sold
Quantity
ADD TO CART
BUY IT NOW
Detail
Customer Reviews
  • Overview
Surenoo 4.0-3.5-3.2-2.8 Inch Serial SPI Display Module TN Series, CTP & NTP is Optional for your design, It's standard 14P/2.54 Pin Header solder on Board.
    • Specification
    Item Parameter
    Manufacturer Surenoo
    Display Type Serial SPI Display Module
    Continuity Supply More than 10 years
    Diagonal Size 4.0“ 3.5“ 3.2“ 2.8“
    Part No. (LCD Wiki) SSP0400B_480320 SSP0350B_480320 SSP0320B_320240 SSP0280B_320240
    Display Format 480*320 480*320 320*240 320*240
    Display Type TN (12:00 O'Clock) IPS IPS IPS
    Display Color RGB 65K Color RGB 65K Color RGB 65K Color RGB 65K Color
    Interface Serial SPI Serial SPI Serial SPI Serial SPI
    Pins 14P/2.54 14P/2.54 14P/2.54 14P/2.54
    Controller ST7796 ST7796 ILI9341 ILI9341
    Voltage 3.3-5.0V (Recommand: 5.0V) 3.3-5.0V (Recommand: 5.0V) 3.3-5.0V (Recommand: 5.0V) 3.3-5.0V (Recommand: 5.0V)
    PCB Size 60.88X108.00 MM 55.50X98.00 MM 55.04X90.50 MM 50.00X86.00 MM
    CTP Size 60.88X94.57 MM
    		 55.50X84.96 MM
    		 55.24X77.90 MM 50.00X69.20 MM
    LCD Szie 60.88X94.57 MM
    		 55.50X84.96 MM 55.04X77.70 MM 50.00X69.20 MM
    Active Area 55.68X83.52 MM 48.96X73.44 MM 48.60X64.80 MM 43.20X57.60 MM
    Touch Panel Optional CTP
    (FT6336U-IIC)    		 NTP RTP
    (FT6336U-IIC)    		 NTP RTP
    (FT6336U-IIC)    		 NTP RTP
    (FT6336G-IIC)    		 NTP
    SKU MSP4031 MSP4030 MSP3526 MSP3525 MSP3223 MSP3222 MSP2834 MSP2833
    Operating Temperature
    -20℃~60℃
    Storage Temperature
    -30℃~70℃
    • Outline Drawing
    1. SSP0400B_480320

    2. SSP0350B_480320

    3. SSP0320B_320240

    4. SSP0280B_320240

    • Interface
    Pin No. Symbol Description
    1 VCC Power Input (3.3-5.0V), Recommand: 5,0V
    2 GND
    		 Ground
    3 CS LCD Chip Select Signal, Low Level Enable
    4 Reset
    		 LCD Reset Signal, Low Level Enable
    5 DC/RS LCD Register / Data Selection Signal, High Level: Register, Low Level: Data
    6  SDI (MOSI) SPI Bus Write Data Signal (SD card and LCD screen used together)
    7 SCK SPI Bus Clock Signal (SD card and LCD screen used together)
    8 LED Backlight Control (If you need control, please connect the pins. If you don't need control, you can skip it)
    9  SDO (MISO)
    		 SPI Bus Read Data Signal (SD card and LCD screen used together)
    The following is the touch screen signal line wiring, if you do not need to touch function or the module itself does not have touch function, you can not connect them.
    10 CTP_SCL Capacitive Touch Screen IIC Bus Clock Signal
    11 CTP_CS Capacitive Touch Screen Reset Control Signal, Low Level Reset
    12 CTP_SDA Capacitive Touch Screen IIC Bus Data Signal
    13 CTP_INT
    		 Capacitive Touch Screen IIC Bus touch interrupt signal, when generating touch, input low level to the main control
    14 SD_CS SD Card Selection Control Signal, Low Level Active (without SD card function, can be disconnected)
    SEE ALL
    BACK