Home / Color Display Module >> SPI Display Module >> 7.0-5.0-4.3 Inch / Surenoo 4.3-5.0" 800*480 3-Wire Serail SPI LT7680A TFT LCD Module Display Screen Capacitive Touch Panel CTP GT911 GT1151 for 51 STM32 Dev. Board
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0

Surenoo 4.3-5.0" 800*480 3-Wire Serail SPI LT7680A TFT LCD Module Display Screen Capacitive Touch Panel CTP GT911 GT1151 for 51 STM32 Dev. Board

Model No.: SSP0500A_800480/SSP0430A_800480
Model Size: 5.0 Inch / 4.3 Inch
Resolution: 800*480
Interface: 3-Wire Serial SPI
SPI Controller: LT7680A
Touch Type: CTP (GT911/GT1151)
19 sold
Quantity
ADD TO CART
BUY IT NOW
Detail
Customer Reviews
  • Overview
Surenoo 5.0-4.3 Inch 3-Wire Serial SPI CTP Touch Display Module, it's standard 20P/2.54 Pin Header solder and 20P/0.5 Connector on Board.
It's easy to drive it on STM32 51 Dev. Board.
    • Specification
    Item of general information Contents Unit
    LCD Display Size (Diagonal) 5.0 (TN) 4.3 (IPS) Inch
    Module Structure LCD + C-TOUCH + PCB  -
    LCD Display Type TFT/TRANSMISSIVE  -
    LCD Display Mode Normally Black  -
    Recommended Viewing Direction 12:00
    		 ALL VIEW O'Clock
    Gray Inversion Direction 6:00
    		 ALL VIEW O'Clock
    Module Size (W×H×T) 137.30X80.97X7.28
    		 122.00X69.09X6.75
    		 MM
    Model No. (Datasheet Download) SSP0500A-800480 SSP0430A-800480 -
    Active Area (W×H) 108.00X64.80 95.04X53.86 MM
    Resolution 800(RGB)×480 800(RGB)×480 Pixel
    Pixel Pitch (W×H) 0.1350X0.1350 0.1188X0.1122 MM
    Interface Type LCD 3-Wire SPI Interface (LT7680A) - 
    Touch (CTP) IIC Interface (5,0: GT911; 4.3" GT1151)
    		 -
    Module Input Voltage 5.0V V
    Module Power Consumption - mA
    Color Numbers 262K  -
    Backlight Type  White LED  -
    • Outline Drawing
    1. SSP0500A_800480


    2. SSP0430A_800480

    • Interface
    1. J1 & J2 Module Interface Description 
    Pin No. Symbol I/O Description
    1-2 VCC5V Power Supply Module Power Supply (5V Typ.)
    3, 4, 16, 20 GND
    		 Power Supply Power Ground
    5 LCD_CS I Chip Select Pin for 3-Wire Serial I/F
    6 LCD_MOSI
    		 I Data Input Pin of 3-Wire SPI I/F
    7 LCD_SCLK I Clock of 3-Wire Serial I/F
    8 LCD_INT O The Interrupt Output for host to indicate the status
    9 LCD_RST I This is an Active Low Reset Pin for LCD
    10 LCD_MISO O Bi-direction Data Pin of 3-Wire SPI I/F
    11 CTP_INT
    		 O CTP External Interrupt to the host
    12 CTP_SCL I CTP I2C Clock Input
    13 CTP_SDA I/O CTP I2C Data Input and Output
    14 CTP_RST I CTP External Reset Signal, Low is Active
    15, 17-19 NC
    		 - No Connection

    2. J3 Interface Description (SPI Flash Burning Interface)
    Pin No. Symbol I/O Description
    1 SF_CLK I Serial Clock Input
    2 SF_DI I Serial Data Input
    3 SF_DO O Serial Data Output
    4 SF_CD
    		 I Chip Selection
    5 LCD_RST I LCD Reset Signal, This Pin must be Pull Low
    6 GND Power Supply Power Ground
    7-8 NC - No Connection
    9-10 3.3V Power Supply Power Supply for the SPI Flash (3.3V)
    SEE ALL
    BACK