Home / Color Display Module >> SPI Display Module >> 7.0-5.0-4.3 Inch / Surenoo 7.0" 1024*600 800*480 3-Wire Serial SPI LT7686 TFT LCD Module Display Screen Capacitive Touch Panel CTP FT5426 for 51 STM32 Dev. Board
  • Surenoo 7.0
  • Surenoo 7.0
  • Surenoo 7.0
  • Surenoo 7.0
  • Surenoo 7.0

Surenoo 7.0" 1024*600 800*480 3-Wire Serial SPI LT7686 TFT LCD Module Display Screen Capacitive Touch Panel CTP FT5426 for 51 STM32 Dev. Board

WISHLIST
Model No.: SSP0700A_1024600/SSP0700A_800480
Model Size: 7.0 Inch
Resolution: 1024*600 / 800*480
Interface: 3-Wire Serial SPI
SPI Controller: LT7686
Touch Type: CTP (GT5426)
19 sold
Quantity
ADD TO CART
BUY IT NOW
  • Detail
    • Overview
    Surenoo 7.0 Inch 3-Wire Serial SPI CTP Touch Display Module, it's standard 20P/2.54 Pin Header solder and 20P/0.5 Connector on Board.
    It's easy to drive it on STM32 51 Dev. Board.
      • Specification
      Item of general information Contents Unit
      LCD Display Size (Diagonal) 7.0" Inch
      Module Structure LCD + C-TOUCH + PCB  -
      LCD Display Type TFT/TRANSMISSIVE  -
      LCD Display Mode Normally Black  -
      Recommended Viewing Direction 12:00 O'Clock
      Gray Inversion Direction 6:00 O'Clock
      Module Size (W×H×T) 185.00X105.00X7.98 MM
      Model No. (Datasheet Download) SSP0700A_1024600 SSP0700A_800480 -
      Active Area (W×H) 154.21X85.92 154.08X85.92 MM
      Resolution 1024(RGB)×600 800(RGB)×480 Pixel
      Pixel Pitch (W×H) 0.1506X0.1432 0.1926X0.1790 MM
      Interface Type LCD 3-Wire SPI Interface (LT7686) - 
      Touch (CTP) IIC Interface (FT5426)
      		 -
      Module Input Voltage 5.0V V
      Module Power Consumption - mA
      Color Numbers 262K  -
      Backlight Type  White LED  -
      • Outline Drawing
      1. SSP0700A_1024600


      2. SSP0700A_800480

      • Interface
      1. J1 & J2 Module Interface Description 
      Pin No. Symbol I/O Description
      1-2 VCC5V Power Supply Module Power Supply (5V Typ.)
      3, 4, 16, 20 GND
      		 Power Supply Power Ground
      5 LCD_CS I Chip Select Pin for 3-Wire Serial I/F
      6 LCD_MOSI
      		 I Data Input Pin of 3-Wire SPI I/F
      7 LCD_SCLK I Clock of 3-Wire Serial I/F
      8 LCD_INT O The Interrupt Output for host to indicate the status
      9 LCD_RST I This is an Active Low Reset Pin for LCD
      10 LCD_MISO O Bi-direction Data Pin of 3-Wire SPI I/F
      11 CTP_INT
      		 O CTP External Interrupt to the host
      12 CTP_SCL I CTP I2C Clock Input
      13 CTP_SDA I/O CTP I2C Data Input and Output
      14 CTP_RST I CTP External Reset Signal, Low is Active
      15, 17-19 NC
      		 - No Connection

      2. J3 Interface Description (SPI Flash Burning Interface)
      Pin No. Symbol I/O Description
      1 SF_CLK I Serial Clock Input
      2 SF_DI I Serial Data Input
      3 SF_DO O Serial Data Output
      4 SF_CD
      		 I Chip Selection
      5 LCD_RST I LCD Reset Signal, This Pin must be Pull Low
      6 GND Power Supply Power Ground
      7-8 NC - No Connection
      9-10 3.3V Power Supply Power Supply for the SPI Flash (3.3V)
    • Customer Reviews
      No comments
    BACK