Home / Color Display Module >> SPI Display Module / Surenoo 4.3-5.0" 800*480 3-/4- Wire Serial SPI LT7680A TFT IPS LCD Module Display Screen Capacitive Touch Panel CTP GT911 GT1151 for 51 STM32 Dev. Board
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0
  • Surenoo 4.3-5.0

Surenoo 4.3-5.0" 800*480 3-/4- Wire Serial SPI LT7680A TFT IPS LCD Module Display Screen Capacitive Touch Panel CTP GT911 GT1151 for 51 STM32 Dev. Board

WISHLIST
Model No.: SSP0500B-8004800 / SSP0430B-8004800
Model Size: 5.0 Inch / 4.3 Inch
Resolution: 800*480
Interface: 3-/4- Wire Serial SPI
SPI Controller: LT7680A
Touch Type: CTP (GT911/GT1151)
19 sold
Quantity
ADD TO CART
BUY IT NOW
  • Detail
    • Overview
    Surenoo 5.0-4.3 Inch 3-/4- Wire Serial SPI CTP Touch IPS Display Module, it's standard 20P/2.54 Pin Header solder and 20P/0.5 Connector on Board.
    It's easy to drive it on STM32 51 Dev. Board. 
      • Specification
      SSP0500B-800480 (Click Image to Zoom Out)
      LTP CTP RTP NTP
      SSP0430B-800480 (Click Image to Zoom Out)
      LTP CTP RTP NTP



      Item of general information Contents    Unit
      Model No. (Datasheet Download)
      		 SSP0500B-800480
      		 SSP0430B-800480 -
      LCD Display Size (Diagonal) 5.0 (IPS)  4.3 (IPS) Inch
      Module Structure  LCD + C-TOUCH + PCB  -
      LCD Display Type TFT/TRANSMISSIVE  -
      LCD Display Mode Normally Black  -
      Recommended Viewing Direction ALL VIEW O'Clock
      Module Size (W×H×T)
      		 LTP 129.28×86.08×7.70 120.04×78.86×7.70
      		 MM
      CTP 120.70×75.80×7.70 105.40×67.10×7.70
      RTP 120.70×75.80×7.70  105.40×67.10×7.50
      NTP 120.70×75.80×7.00 105.40×67.10×7.00
      Active Area (W×H) 108.00X64.80  95.04X53.86 MM
      Resolution  800(RGB)×480 800(RGB)×480 Pixel
      Pixel Pitch (W×H) 0.1350X0.1350  0.1188X0.1122 MM
      Interface Type LCD 3-/4- Wire SPI Interface (LT7680A) - 
      Touch (LTP/CTP) IIC Interface (5,0: GT911; 4.3" GT1151)
      		 -
      Module Input Voltage 5.0V
      		 V
      Module Power Consumption - mA
      Color Numbers 262K  -
      Backlight Type  White LED  -
      • Outline Drawing (We supply CTP Drawing for reference only, the drawing for other version you can check size in the specifiction. )
      1. SSP0500B_800480 (CTP)


      2. SSP0430B_800480       (CTP)

      • Interface
      1. J1 & J2 Module Interface Description 
      Pin No. Symbol I/O Description
      1-2 VCC5V Power Supply Module Power Supply (5V Typ.)
      3, 4, 16, 20 GND
      		 Power Supply Power Ground
      5 LCD_CS I Chip Select Pin for 3-Wire Serial I/F
      6 LCD_MOSI
      		 I Data Input Pin of 3-Wire SPI I/F
      7 LCD_SCLK I Clock of 3-Wire Serial I/F
      8 LCD_INT O The Interrupt Output for host to indicate the status
      9 LCD_RST I This is an Active Low Reset Pin for LCD
      10 LCD_MISO O Bi-direction Data Pin of 3-Wire SPI I/F
      11 CTP_INT
      		 O CTP External Interrupt to the host
      12 CTP_SCL I CTP I2C Clock Input
      13 CTP_SDA I/O CTP I2C Data Input and Output
      14 CTP_RST I CTP External Reset Signal, Low is Active
      15, 17-19 NC
      		 - No Connection

      2. J3 Interface Description (SPI Flash Burning Interface)
      Pin No. Symbol I/O Description
      1 SF_CLK I Serial Clock Input
      2 SF_DI I Serial Data Input
      3 SF_DO O Serial Data Output
      4 SF_CD
      		 I Chip Selection
      5 LCD_RST I LCD Reset Signal, This Pin must be Pull Low
      6 GND Power Supply Power Ground
      7-8 NC - No Connection
      9-10 3.3V Power Supply Power Supply for the SPI Flash (3.3V)
      • Testing on Surenoo GD32F303RCT6 Development Board

      Note:
      "Surenoo Mini/Micro GD32 Development Board" is NOT inclduing in the package.
      If you need it, please contact Surenoo Customer Servicer to get purchase link.
    • Customer Reviews
      No comments
    BACK