Home / Color Display Module >> SPI Display Module / Surenoo 7.0" 1024*600 3-/4- Wire Serail SPI LT7686 TFT IPS LCD Module Display Screen Capacitive Touch Panel CTP FT5426 for 51 STM32 Dev. Board
  • Surenoo 7.0
  • Surenoo 7.0
  • Surenoo 7.0
  • Surenoo 7.0
  • Surenoo 7.0
  • Surenoo 7.0

Surenoo 7.0" 1024*600 3-/4- Wire Serail SPI LT7686 TFT IPS LCD Module Display Screen Capacitive Touch Panel CTP FT5426 for 51 STM32 Dev. Board

Model No.: SSP0700B_1024600
Model Size: 7.0 Inch
Resolution: 1024*600
Interface: 3-/4- Wire Serial SPI
SPI Controller: LT7686
Touch Type: CTP (GT5426)
19 sold
Quantity
ADD TO CART
BUY IT NOW
Detail
Customer Reviews
  • Overview
Surenoo 7.0 Inch 3-/4- Wire Serial SPI CTP Touch Display Module, it's standard 20P/2.54 Pin Header solder and 20P/0.5 Connector on Board.
It's easy to drive it on STM32 51 Dev. Board.
    • Specification
    SSP0700B-1024600-LTP SSP0700B-1024600-CTP SSP0700B-1024600-RTP SSP0700B-1024600-NTP
    LTP CTP RTP NTP
    Larger Capacitive Touch Panel Capacitive Touch Panel Resistive Touch Panel Without Touch Panel

    Click Image to Zoom Out
    178.80×110.72×7.98
    Click Image to Zoom Out
    164.90×100.00×7.98
    Click Image to Zoom Out
    164.90×100.00×7.98
    Click Image to Zoom Out
    164.90×100.00×5.98


    Item of general information Contents Unit
    LCD Display Size (Diagonal) 7.0" Inch
    Module Structure LCD + TOUCH + PCB
    (NTP Version without TOUCH Struction)    		  -
    LCD Display Type TFT/TRANSMISSIVE  -
    LCD Display Mode Normally Black  -
    Recommended Viewing Direction ALL VIEW O'Clock
    Module Size (W×H×T)
    		 LTP 178.80×110.72×7.98
    		 MM
    CTP 164.90×100.00×7.98
    RTP 164.90×100.00×7.98
    NTP 164.90×100.00×5.98
    Model No. (Datasheet Download) SSP0700B_1024600 -
    Active Area (W×H) 154.21X85.92 MM
    Resolution 1024(RGB)×600 Pixel
    Pixel Pitch (W×H) 0.1506X0.1432 MM
    Interface Type 3-/4- Wire SPI Interface (LT7686) - 
    Module Input Voltage 5.0V V
    Module Power Consumption - mA
    Color Numbers 262K  -
    Backlight Type  White LED  -


    • Outline Drawing
    We supply CTP Drawing for reference only, the drawing for other version you can check size in the specifiction. 


    • Interface
    1. J1 & J2 Module Interface Description 
    Pin No. Symbol I/O Description
    1-2 VCC5V Power Supply Module Power Supply (5V Typ.)
    3, 4, 16, 20 GND
    		 Power Supply Power Ground
    5 LCD_CS I Chip Select Pin for 3-Wire Serial I/F
    6 LCD_MOSI
    		 I Data Input Pin of 3-Wire SPI I/F
    7 LCD_SCLK I Clock of 3-Wire Serial I/F
    8 LCD_INT O The Interrupt Output for host to indicate the status
    9 LCD_RST I This is an Active Low Reset Pin for LCD
    10 LCD_MISO O Bi-direction Data Pin of 3-Wire SPI I/F
    11 CTP_INT
    		 O CTP External Interrupt to the host
    12 CTP_SCL I CTP I2C Clock Input
    13 CTP_SDA I/O CTP I2C Data Input and Output
    14 CTP_RST I CTP External Reset Signal, Low is Active
    15, 17-19 NC
    		 - No Connection

    2. J3 Interface Description (SPI Flash Burning Interface)
    Pin No. Symbol I/O Description
    1 SF_CLK I Serial Clock Input
    2 SF_DI I Serial Data Input
    3 SF_DO O Serial Data Output
    4 SF_CD
    		 I Chip Selection
    5 LCD_RST I LCD Reset Signal, This Pin must be Pull Low
    6 GND Power Supply Power Ground
    7-8 NC - No Connection
    9-10 3.3V Power Supply Power Supply for the SPI Flash (3.3V)
    • Testing on Surenoo GD32F303RCT6 Development Board

    Note:
    "Surenoo Mini/Micro GD32 Development Board" is NOT inclduing in the package.
    If you need it, please contact Surenoo Customer Servicer to get purchase link.
    SEE ALL
    BACK