Home / Surenoo Graphic OLED Display >> Others Series / Surenoo Transparent Graphic OLED Panel 1.51" 12856 128*56 128X56 Graphic LCD Module Display Screen Panel PM-OLED 6800/8080 8-Bit Parallel 4-Wire Serial SPI IIC I2C SSD1309 Controller SOG12856A_T151
  • Surenoo Transparent Graphic OLED Panel 1.51
  • Surenoo Transparent Graphic OLED Panel 1.51
  • Surenoo Transparent Graphic OLED Panel 1.51
  • Surenoo Transparent Graphic OLED Panel 1.51
  • Surenoo Transparent Graphic OLED Panel 1.51

Surenoo Transparent Graphic OLED Panel 1.51" 12856 128*56 128X56 Graphic LCD Module Display Screen Panel PM-OLED 6800/8080 8-Bit Parallel 4-Wire Serial SPI IIC I2C SSD1309 Controller SOG12856A_T151

Display Size: 1.51"
Model No.: SOG12856A_T151
Display Format: 128*56 Dots
Outline: 42.04X27.22MM
Controller: SSD1309 or Equal
16 sold
Quantity
ADD TO CART
BUY IT NOW
Detail
Customer Reviews
  • Overview
SOG12856A_T151 is 1.51" 128X56 Dots Transparent Graphic OLED Module, build-in SSD1309 controller supprot 6800/8080 8-Bit Parallel & 4-Wire Serial SPI & IIC MPU interface, wide operating temperature range, RoHS Compliant, It's 3.3V power supply.

It's easily controlled by MCU such as 8051, PIC, AVR, ARDUINO, ARM and Raspberry Pi. It can be used in any embedded systems, industrial device, security, medical and hand-held equipment.
  • Specification
Gross Weight  0.040Kg
Manufacturer Surenoo
Display Type Graphic OLED Panel
Continuity Supply More than 10 years
Part No. SOG12856A_T151
Diagonal Size (Visual Area)
 1.51"
Display Format 128*56 Dots
Interface
 6800/8080 8-Bit Parallel, 4-Wire Serial SPI, IIC
IC or Equivalent SSD1309 or Equal
Voltage(Type) 3.3V
Outline Dimension 42.04W)x27.22(H)x2.00(T)mm
Visual Area 37.052x19.516mm
Active Area
 35.052x17.516mm
Dots Size 0.274x0.274mm
Dots Pitch
 0.254x0.254mm
Display Type PM-OLED Panel
Colors Code Transparent Blue
IC Package COG
Viewing Direction Full Viewing Angle
Operating Temperature
-40℃~70℃
Storage Temperature
-40℃~80℃
  • Outline Drawing

  • Interface
Pin No. Symbol Type Description
Power Supply
5 VDD P Power Supply for Logic Circuit
This is a voltage supply pin. It must be connected to external source.
3 VSS P Ground of OEL System
This is a ground pin. It also acts as a reference for the logic pins, the OEL driving voltages, and the analog circuits. It must be connected to external ground.
23 VCC P Power Supply for OEL Panel
This is the most positive voltage supply pin of the chip. It must be supplied externally.
2 VLSS P
Ground of Analog Circuit
This is an analog ground pin. It should be connected to VSS externally.
Driver
21 IREF I Current Reference for Brightness Adjustment
This pin is segment current reference pin. A resistor should be connected between this pin and VSS. Set the current at 10uA.
22 VCOMH P Voltage Output High Level for COM Signal
This pin is the input pin for the voltage output high level for COM signals. It can be supplied externally or internally. When VCOMH is generated internally, a capacitor should be connected between this pin and VSS
Interface
6
7		 BS1
BS2		 I
Communicating Protocol Select
These pins are MCU interface selection input. See the following table:
8-bit 68XX Parallel 8-bit 80XX Parallel  4-wire SPI IIC
BS1 0 1 0 1
BS2 1 1 0 0
9 RES# I Power Reset for Controlle and Driver
This pin is reset signal input. When the pin is low, initialization of the chip is executed.
8 CS# I Chip Select
This pin is the chip select input.  The chip is enabled for MCU communication only when CS# is pulled low.
10 D/C#  I Data/Command Control
This pin is Data/Command control pin.
When the pin is pulled high, the input at D7~D0 will be interpreted as display data. When the pin is pulled low, the input at D7~D0 will be transferred to the command register.
When the pin is pulled high and serial interface mode is selected, the data at SDIN will be interpreted as data. When it is pulled low, the data at SDIN will be transferred to the command register.
In I2C mode, this pin acts as SA0 for slave address selection.
For detail relationship to MCU interface signals, please refer to the Timing Characteristics Diagrams.
12 E/RD# I Read/Write Enable or Read
This pin is MCU interface input.
When interfacing to a 68XX-series microprocessor, this pin will be used as the Enable (E) signal. Read/write operation is initiated when this pin is pulled high and the CS# is pulled low.
When connecting to an 80XX-microprocessor, this pin receives the Read (RD#) signal. Data read operation is initiated when this pin is pulled low and CS# is pulled low.
When serial or I2C mode is selected, this pin must be connected to VSS.
11 R/W# I Read/Write Select or Write
This pin is MCU interface input.
When interfacing to a 68XX-series microprocessor, this pin will be used as Read/Write (R/W#) selection input.  Pull this pin to “High" for read mode and pull it to “low" for write mode.
When 80XX interface mode is selected, this pin will be the Write (WR#) input.  Data write operation is initiated when this pin is pulled low and the CS# is pulled low.
When serial or I2C mode is selected, this pin must be connected to VSS.
13~20 D7-D0 I/O Host Data Input/Output Bus
These pins are 8-bit bi-directional data bus to be connected to the microprocessor’s data bus.
When serial mode is selected, D1 will be the serial data input SDIN and D0 will be the serial clock input SCLK.
When I2C mode is selected, D2, D1 should be tired together and serve as SDAOUT, SDAIN in application and D0 is the serial clock input, SCL.
Unused pins must be connected to VSS except for D2 in serial mode.
Reserve
4 NC - Reserved Pin
The NC pin between function pins are reserved for compatible and flexible design.
1, 24 NC (GND) - Reserved Pin (Supporting Pin)
The supporting pins can reduce the influences from stresses on the function pins.  These pins must be connected to external ground.
  • Documents
No. Item File Name File Type ICON Date Description Mark
1 Datasheet SOG12856A_T154 PDF 2013-03-17 Standard 128*56 Transparent Graphic OLED Panel
2 Controller SSD1309 PDF 2008-09-24 SSD1309 is a COG Graphic 128*64 OLED Controller
SEE ALL
BACK